PX200NB
–
Manual
Page 47 / 57
card operator (see section 9.2.2 Phone number). If yes, the set parameters will be
valid for communication. If not, the parameters from the default profile are set.
9.2.1.2.
Profiles and profile settings
This functionality allows you to define up to 3 mobile network operator profiles. To do
this, press "+" in the section:
Codes must be defined for each profile:
•
MCC
(Mobile Country Code)
–
this is a unique number that identifies the
country in which the mobile network operator operates. This code consists of
up to 3 digits.
•
MNC
(Mobile Network Code) - this is a unique number within a country that
identifies the mobile network operator. This code consists of up to 3 digits.
Below are several methods for determining the correct MCC and MNC codes:
•
Check via web browser;
•
Contact with the mobile network operator;
•
Best solution is to use functionalities of EBS Config 2.0 application, run
communicator with the SIM card of the given mobile network operator, open
window ‘Device state’ (details in chapter
), read codes as
presented below:
In addition, the telephone number of the server must be defined for each profile
(section 9.2.2 Phone number). These parameters can be the same or different.
Depending on the inserted SIM card of a given operator, the device selects either
default values (if no profile is defined or the device does not recognize the profile) or
the corresponding parameters defined for a given profile - operator identification
