PX200NB
–
Manual
Page 22 / 57
•
OSM.Server
–
type of remote connection with an OSM.Server via GSM/LTE;
You can define the following parameters using this window:
IP address of an analyser
Port to be monitored by the analyser for commands, e.g. 9000
Name of the analyser e.g. primary
which apply to the settings of a receiver of the OSM.Server monitoring system.
The connection will be saved after clicking “OK”. From now on, the program will
allow you to remotely connect to the device and also to read and store parameters
in the device memory.
•
GD-PROG
–
type of local connection working with a programming device by
the same name with a single COM port assigned.
•
SP-PROG
–
this type of connection includes two programming devices:
SP-PROG equipped with a micro USB and RS232 ports, with two COM ports
assigned. One is a configuration port for use during programming, and the
second is information port for use during monitoring of the status of
communicators.
SP-PROG-BT, equipped with a micro USB, RS232 ports and a Bluetooth
module. When connected using a cable, it is the same as with SP-PROG.
When using Bluetooth, set the same port number both for
Configuration
port
and
Information port,
which will be used for communication.
•
MINI-PROG-BT
—
a type of local connection working with a programming
device by the same name with a single COM port assigned.
If the new ports have not been displayed automatically after connecting the
programming device, press “Refresh ports”.
When using the Bluetooth connection, the first step is to pair the programming
device (SP-PROG-BT, MINI-PROG-BT) with the PC/smart phone. Select the correct
