PX200NB
–
Manual
Page 15 / 57
5.
OPERATION
A device maintains communication via cellular network. If any problem follows a
device automatically switch to SMS mode (if this mode has been programmed before-
See chapter 7. Programmable parameters). As a result the communicator may be
used only at the territory covered with mobile phone operator network.
Input violation or sabotage, and change the input state results immediate signal
transmitting of this event by the device.
To avoid an excessive cost of use related in particular to false alarms a device
possesses a programmable analysis of inputs.
All inputs respond only to states change which means that transmitting will follow
only if an active state is on input and maintains during programmed minimum time.
Maintenance of active state longer than a minimum time will result in single indicating.
Another input activation (another transmitting) is possible only after input reached
based state.
Number of messages sent in SMS mode is limited (limit includes also text massages
or answers to orders sent by user).This function provides for cost reduction by limiting
messages e.g. in case of damage of sensor connected to any input. After passage of
programmed time new messages will be sent but only in a number determined by the
user.
Text message on events sent to private phone numbers may be edited.
All programmable parameters are saved in memory and in case of voltage drop that
are not lost. Supply of power starts the communicator with saved settings.
