PX200NB
–
Manual
Page 18 / 57
6.5.2.
Open…
If you have a file with saved settings, these data can be used to program another
device. First of all, specify the catalogue where the file was stored, and then specify
the file name. The obtained data set can be modified by the user. Send the read and
possibly modified data to the alarm panel by switching it into the programming
mode using a dedicated programming device.
6.5.3.
Save as…
If you program a number of devices in different configurations, you do not need to
remember each of them. You can save on your hard drive all the device settings
under a specific name and read them later. This feature saves all information from
the configuration windows to the drive. After calling the function a dialogue box
appears asking for the file name. The default data is saved with the following
extension:
.cmi
.
6.5.4.
Device state
The “Device state” window includes information about the device: serial number,
hardware version, firmware, set date and time. Additionally, the following
parameters can be monitored in real time:
o
Status of server connection,
o
Status of DC power,
o
The GSM/LTE network signal level,
o
Status of the wired inputs,
o
Status of the wired outputs,
o
Arming mode.
