PX200NB
–
Manual
Page 40 / 57
8.1.2.
Events
In this section, you can define the signals generated by the device to be transferred
to a monitoring station by every device added. These are the following pieces of
information:
•
On/Off, lock, tamper inputs,
•
On/Off outputs,
•
Power failures,
•
Partitions arm/disarmed,
•
Start/stop connection, on/off hook, dialing,
•
Communicator states
•
Communication with the monitoring center
—
information about update of time,
configuration changes, start and finish of jamming, etc.;
•
Information
—
information about the start of a control panel, CLIP, about
entering an incorrect code, etc.;
8.2.
INITIAL STATES
8.2.1.
Skip initial states
This option allows for locking of sending of information on status of active inputs at
power connection. Information on inputs will be sent to server after the first change
from inactive to active status.
