Eaton TRSM0515, Руководство по обслуживанию

Страница: 84 / 88

c.
1.
2.
3.
4.
5.
To Install the Range Control Valve.
Install O-ring clamp on gear shift lever.
Install the control valve on gear shift lever with
clamp, and replace ball grip on gear shift lever.
Position top of control valve button at least six
inches below ball grip.
If air lines are to be replaced, measure lines and
6. Install the black nylon air line from the "OUT"
port of control valve to the airport marked "P" in
hexagonal end cap of air valve.
7. Install the white nylon air line from the "IN" port
of control valve to the tee in supply port of air
valve.
sheathing for correct length.
Install sheathing on lines and draw under O-ring
clamp on lever.
Connect the black nylon air line to the port
marked "OUT" on the control valve and connect
the white nylon air line to the port marked "IN"
on the control valve.
REASSEMBLY