Eaton TRSM0515, Руководство по обслуживанию

Страница: 56 / 88

6. Install O-ring on OD of piston. Apply light coat
of silicone lubricant to O-ring.
- .
7. Install piston on shaft and against copper
washer, flat side of piston out.
8. Install Iockwasher and nut on shaf to secure
piston.
9.
E.
Install gasket and cylinder cover, tighten the
four capscrews securely.
To Reassemble the Countershaft
Assemblies.
1. Install bearing inner race on front and rear of
countershaft.
2. IMPORTANT: To mark countershaft gear teeth
for timing.
Mark the tooth on the countershaft low speed
gear which is stamped with an "O".
AUXILIARY REASSEMBLY