Eaton TRSM0515, Руководство по обслуживанию

Страница: 6 / 88

Downshifting
To get to low range
push button DOWN
while in 6th speed,
then move lever to
5th speed.
1. When shifting down,
move the lever from 10th
through each succes-
sive lower speed to 6th.
2. When in 6th, and ready for the next downward
shift, PUSH the Range Control Button DOWN and
move the lever to 5th speed. As the lever passes
through the neutral position, the transmission will
automatically shift from high range to low range.
3. With the transmission in low range, shift down
ward through each of the four remaining steps.
Use Range Control Button only as described
Don't shift from high range to low range at high
speeds.
Don't make range shifts with the vehicle moving in
reverse gear.
Skip-shifting is easy, too
Skip-shifting is easy with the Roadranger trans-
mission. Depending on the load, the RT-6610 can
be shifted as a 6, 7, 8, 9 or 10 speed transmission.
When you skip-shift going up make sure to pull
the range control "up" to high range before the
shift which passes 5th. Skip-shifting down, make
sure to push the range control down to low range
before the shift which passes 6th.
Following are some suggested skip-shifting pat-
terns:
For 6-speed shifting with light loads
shift 3, 5, 7, 8, 9, 10
For 7-speed shifting with medium-heavy loads
shift 2, 4, 6, 7, 8, 9, 10
For 8-speed shifting with heavy loads
shift 2, 4, 5, 6, 7, 8, 9, 10
"Stop" sign or
"Slow" sign
When slowing down for a
"stop" or "slow" sign, shift
down through the individual
short steps. By following this procedure the com-
pression of the engine will slow the vehicle. The
life of chassis and trailer brakes can thus be pro-
longed.
Shifting the
Fuller
®
RT & RTO-6610
Roadranger
®
Transmissions
Ratios
Ratios
Models
1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th
Rev.
RT-6610 8.94 7.00 5.46 4.26 3.42 2.61 2.05 1.60 1.25 1.00
RTO-6610 7.17 5.61 4.38 3.42 2.74 2.10 1.64 1.28 1.00
.80
9.50
2.78
7.62
2.23
OPERATION