Eaton TRSM0515, Руководство по обслуживанию

Страница: 48 / 88

5. Remove the copper seal from shaft.
.
6. Move the synchronizer assembly, shift yoke,
and piston shaft forward and out of housing
as a complete assembly.
7.
8.
Remove the shaft and yoke from synchronizer
assembly.
Cut lockwire, turn out the two Iock screws and
remove yoke from shaft.
9. Place the larger low range synchronizer ring
on bench.
10. Pull upward to remove the high range synchro-
nizer from pins.
CAUTION. There are three springs located in
housing of high range synchronizer which will
be released as high range synchronizer is
removed from pins. It may be helpful to cover
assembly with rag to prevent losing springs.
11.
D.
Remove the sliding clutch from low range
synchronizer pins.
-
To Remove and Disassemble the Air
Cylinder Assembly.
1. Important: Remove the dust seal, and air port
extension from top of housing.
AUXILIARY DISASSEMBLY