Eaton TRSM0515, Руководство по обслуживанию

Страница: 17 / 88

IV. RANGE SHIFT AIR LINESãALL MODELS
Cut 7001 D-7/84
A. Removal
1. Disconnect the black and white l/8" OD air lines
(A and B) from between the slave air valve and the
range shift control valve.
2. Disconnect the two 1/4" ID air lines from
between the slave air valve and the range shift
cylinder.
B. Installation
1. Connect the black and white 1/8" OD supply air
line between the forward port on the slave air valve
and the rear port on the range shift control valve.
2. Install the black l/8" OD signal air line between
the rear port on the slave air valve and the forward
port on the range control valve.
3. Use the chart to install the 1/4" ID air lines
between the slave air valve side cap and the range
shift cylinder.
AIR SYSTEM