Eaton TRSM0515, Руководство по обслуживанию

Страница: 28 / 88

4. Tilt housing and remove the three tension balls
5.
6.
installed under springs.
Place the housing in a vise with the plunger side
up; front of housing will be to the right.
Starting with the upper bar, move all bars to the
right and out front of housing as detailed in the
f o l l o w i n g i n s t r u c t i o n s . C u t l o c k w i r e a n d
remove Iockscrews from each bar just prior to
its removal.
7. Move top shifting bar to the right and out of
8.
housing, removing shifting yoke-from bar.
Move center bar to the right and out of hous-
ing, removing shifting yoke from bar. As
neutral notch in bar clears the front web,
remove the interlock pin from bore in neutral
notch.
NOTE: During disassembly, lay all parts on a
clean bench in the order of removal to facilitate
reassembly. Bars not being removed must be
kept in the neutral position or interlock parts
will lock bars.
DISASSEMBLY