Eaton TRSM0515, Руководство по обслуживанию

Страница: 32 / 88

V. FRONT SECTION DISASSEMBLY
A. To Remove Bearings from Right
Countershaft.
3. Install snap ring in the exposed bearing snap
ring groove. (Use snap ring which was removed
from rear bearing bore.)
1. Remove snap ring in rear bearing bore of case.
4. Loosen the capscrews at the bearing retaining
2. Using soft bar and maul against rear of counter-
rings on auxiliary drive gear. This will allow
shaft, move the assembly forward as far as
movement to the rear of the countershaft and
possible until snap ring groove in front bearing
mainshaft assemblies.
is exposed.
NOTE: If front bearing snap ring groove can not
be exposed (due to variances in thickness of
case), use punch between hub of countershaft
drive gear and inner race of bearing to move the
gear forward on shaft.
DISASSEMBLY