Eaton SM65, Руководство пользователя

Страница: 16 / 73

SM65 Supervisory Module Handbook
10
Copyright © 2004-2009 Eaton Corporation. All Rights Reserved.
IPN 997-00012-35E December 2009
Keypad Access Security
‡
Requires SM65 version 3 or later.
This feature prevents accidental or unauthorized changes to settings from the SM65 keypad.
► To enable Keypad Access Control
1
In DCTools go to Configuration > Communications.
2
Set UI Access to Protected .
3
Click Apply Changes .
4
Now, to make changes to settings from the SM65 keypad first press
7
and
6
together
for more than 10 seconds.
5
To remove Keypad Access Control set UI Access to Unprotected .
About Display Modes
The SM65 menu structure has four display modes:
•
Main Display Mode – for viewing system values
•
Status View Mode – for viewing system statuses as well as viewing and clearing alarms
•
Configuration Mode – for viewing settings of configurable parameters
•
Edit Mode – for editing the configurable parameters in Configuration Mode
For easy reference see the supervisory module menu structure on the inside front and back
covers.
Changing display modes
► To enter a display mode
•
From Main Display Mode, press
:
to enter Status View Mode and Alarm Mode.
•
From Main Display Mode, press
8
to enter Configuration Mode and Edit Mode.
► To exit a display mode
•
Press
9
to return from any mode to Main Display Mode.
Scrolling within a display mode
► To scroll within a display mode
•
Press
7
to scroll up within a display mode.
•
Press
6
to scroll down within a display mode.
‡
To scroll through a display mode faster, hold down
7
or
6
Using Edit mode
For details about Edit Mode refer to Viewing and Editing Configuration File Parameters on
page
13 .