Eaton SM65, Руководство пользователя

Страница: 19 / 73

Operation
Copyright © 2004-2009 Eaton Corporation. All Rights Reserved.
IPN 997-00012-35E December 2009
13
► To view system status messages
1
Press
:
to enter Status View Mode.
If there are active alarms , press
6
to scroll to the bottom of the alarm list. The control
status list is displayed after the last alarm.
2
Press
6
or
7
to scroll through the list of status messages.
3
Press
9
to return to Main Display Mode.
Viewing Software Version
► To view the SM65 software version using the keypad
1
Press
:
to enter Status View Mode.
‡
If there are active alarms, press
6
to scroll to the bottom of the alarm list. The control
status list is displayed after the last alarm.
2
Press
6
to scroll to the Identity screen to view the software version of the SM65.
3
Press
9
to return to Main Display Mode.
► To view the SM65 software version using
DCTools
1
Start DCTools (refer to the Communications Options on page 30 ).
2
From the DCTools System Summary (Home) screen, go to Configuration > Identity.
Viewing and Editing Configuration File Parameters
Configuration Mode displays only those configuration file parameters that are most likely to
be changed on-site. These parameters can be changed in Edit Mode.
For viewing and editing all other configuration file parameters a laptop computer or remote
access is required. See Communications Options on page
30 for details.
► To view and edit a configuration file parameter
1
From Main Display Mode, press
8
to enter Configuration Mode.
2
Press
6
to scroll down to the required parameter.
3
Press
8
to enter Edit Mode.
‡
If access to Edit Mode is not available then see Keypad Access Security on page 10 .
4
Press either
7
or
6
to change the value as appropriate.
5
Press
8
to save the new value and return to Configuration Mode, or
6
Press
9
to cancel the change and return to Configuration Mode.
7
Press
9
to return to Main Display Mode.