Eaton SM65, Руководство пользователя

Страница: 3 / 73

About This Guide
Copyright © 2004-2009 Eaton Corporation. All Rights Reserved.
IPN 997-00012-35E December 2009
i
About This Guide
Scope
This guide covers the configuration, operation and replacement of SM65 supervisory
modules installed in an Eaton DC power system.
‡
Some features require SM65 v4 or later software. To check software version refer to Viewing
Software Version on page 13 .
This guide does not cover the following:
•
Initial installation of an SM65 supervisory module, except the installation of external
alarm and digital inputs cabling.
•
Installation and configuration of other Eaton products. For details, refer to the relevant
guide listed under Related Information on page
ii .
•
Detailed instructions for setting up DCTools/PowerManagerII , except for the
DCTools/PowerManagerII communications settings on page 33 .
•
Detailed instructions for setting up user alarms and configuring individual parameters
in the SM65. There are brief explanations of SM65 alarms on page
49 and control
functions on page 51 .
•
Supervisory module upgrades such as from SM60 to SM65 and SM50 to SM65. These are
covered in application notes AN0054 and AN0055 respectively. To receive these
application notes refer to Worldwide Support on page
65 .
Audience
This guide is intended for use by:
•
DC power system installers competent in:
•
installing and commissioning DC Power Systems
•
safe working practices for AC and DC powered equipment
•
the relevant local electrical safety regulations and wiring standards
•
DC power system operators and maintenance staff competent in:
•
operation of DC Power Systems
•
safe working practices for AC and DC powered equipment