Zero 88 FLX S Lighting Console
– User Manual
Page
47
of
47
Basic maintenance
FLX S is designed to be relatively maintenance free,
however a few simple steps can prolong the life of your
hardware.
Cleaning the surface
Every month or so, gently wipe down the front panel with a
nonabrasive, non-corrosive surface cleaner applied with a
soft cloth.
Cleaning the faders
A can of compressed air can be used to clear our dust
from the fader tracks. Do NOT use an oil based lubricant
(such as WD-40) on faders as this will cause irreparable
damage to your FLX S.
Transportation & storage
Care should be taken when transporting FLX S. Flight
cases are available (
listed under “accessories” on the first
page of this guide) for the transportation of FLX S
– the
cardboard box which FLX S is supplied in is intended only
for one or two journeys, and should not be relied upon to
keep the console safe for prolonged use.
Operating environments
Always observe the operating environment information in
the main FLX S manual. If this environment is exceeded, it
is likely that damage will occur to your FLX S. To download
the full manual, please visit
zero88.com
Reporting a problem
Before reporting a problem to Zero 88, please obtain as
many of the following pieces of information as possible:
-
The console’s current software version
-
A copy of the current showfile
-
Details of what you were doing at the time, or which
playback / palette etc is affected.
-
If the system has crashed, the console will offer you a
debug file the next time you turn it on.
Support requests can be submitted through our support
forum at
zero88.com/forum
or via email to
For more urgent requests, please contact Zero 88 by
telephone on +44 (0)1633 838088
– 24 hour answer
service available.
If you have reported a problem by email or on the forum,
please bear with us as our response may take a few days
if your problem is complex. It is also worth checking other
posts on the forum to see if the fault is already reported /
fixed before contacting Zero 88.
If you suspect that your problem is software related, please
always check that you are running the latest software
version. This can be found at
zero88.com/software
Mechanical information
Dimensions
90mm (H) x 660mm (W) x 340mm (D)
Weight
7.5 kg
Operating temperature range
+5 to +40 °C
Humidity
5% to 95% non-condensing
WARNING! -
NO USER SERVICEABLE PARTS INSIDE
