![background image](http://html1.mh-extra.com/html/eaton/edr-5000/edr-5000_nstallation-operation-and-maintenance-manual_3977585702.webp)
EDR-5000
IM02602007E
Parameter Set Parameters of the Power Protection Module
Parameter
Description
Setting range
Default
Menu path
Function
Permanent activation or deactivation of module/element. Inactive,
Active
Inactive
[Protection Para
/<1..4>
/Power-Prot
/32[1]]
ExBlo Fc
Activate (allow) or inactivate (disallow) blocking of the
module/element. This parameter is only effective if a
signal is assigned to the corresponding global protection
parameter. If the signal becomes true, those
modules/elements are blocked that are parameterized
"ExBlo Fc=active".
Inactive,
Active
Inactive
[Protection Para
/<1..4>
/Power-Prot
/32[1]]
Blo TripCmd
Permanent blocking of the Trip Command of the
module/element.
Inactive,
Active
Inactive
[Protection Para
/<1..4>
/Power-Prot
/32[1]]
ExBlo TripCmd Fc
Activate (allow) or inactivate (disallow) blocking of the
module/element. This parameter is only effective if a
signal is assigned to the corresponding global protection
parameter. If the signal becomes true, those
modules/elements are blocked that are parameterized
"ExBlo TripCmd Fc=active".
Inactive,
Active
Inactive
[Protection Para
/<1..4>
/Power-Prot
/32[1]]
LOP Blo
Measuring Circuit Supervision Voltage
Inactive,
Active
Inactive
[Protection Para
/<1..4>
/Power-Prot
/32[1]]
CTS Blo
Measuring Circuit Supervision Current
Inactive,
Active
Inactive
[Protection Para
/<1..4>
/Power-Prot
/32[1]]
Pickup P>
Over(load) Active Power Pickup Value. Can be used for
monitoring the maximum allowed forward power limits of
transformers or overhead lines. Definition for Sn is as
follows: Sn = 1.7321 * VT rating * CT rating. The voltage
is the line-to-line voltage.
Only available if: Device Planning: PQS.Mode = Pickup
P>
0.003 - 10.000VAn
1.20VAn
[Protection Para
/<1..4>
/Power-Prot
/32[1]]
www.eaton.com
702