![background image](http://html1.mh-extra.com/html/eaton/edr-5000/edr-5000_nstallation-operation-and-maintenance-manual_3977585844.webp)
EDR-5000
IM02602007E
Setting Group Parameters of the LOP Module
Parameter
Description
Setting range
Default
Menu path
Function
Permanent activation or deactivation of module/element. Inactive,
Active
Inactive
[Protection Para
/<1..4>
/Supervision
/LOP]
ExBlo Fc
Activate (allow) or inactivate (disallow) blocking of the
module/element. This parameter is only effective if a
signal is assigned to the corresponding global protection
parameter. If the signal becomes true, those
modules/elements are blocked that are parameterized
"ExBlo Fc=active".
Inactive,
Active
Inactive
[Protection Para
/<1..4>
/Supervision
/LOP]
LOP Blo Enable
Activate (allow) or inactivate (disallow) blocking by the
module LOP.
Inactive,
Active
Inactive
[Protection Para
/<1..4>
/Supervision
/LOP]
I<
To prevent unintended operation during faults, the
overcurrent threshold should be used to distinguish
between load current and overcurrent. If the current
detector identifies load current as overcurrent (threshold
to low), a LOP situation will not be detected and if the
threshold is too high, a fault situation will be identified as
LOP which results in blocking of protection functions.
0.5 - 4.0In
2.0In
[Protection Para
/<1..4>
/Supervision
/LOP]
t-Pickup
Pickup Delay
0 - 9999.0s
0.1s
[Protection Para
/<1..4>
/Supervision
/LOP]
www.eaton.com
844