Eaton EDR 3000, Инструкция по установке, эксплуатации и обслуживанию, Страница: 339 / 770

EDR-3000 IM02602003E
Additional parameters can be changed if required.
There are two options available to transfer changed parameters into the device within menu »Device«.
1.
»Transfer all Parameters into the Device«
. This always requires the Supervisor (administrator) password.
2.
»Transfer only modified parameters into the Device«
. For this parameter transfer the User needs passwords that
provide sufficient access authorization for all parameters that are to be transferred.
Confirm the safety inquiry »Shall The Parameters Be Overwritten?«.
Enter the password for setting parameters in the popup window.
Confirm the inquiry »Shall The Data Be Saved Locally?« with »Yes« (recommended). Select a suitable storing
location on your hard disk.
Confirm the chosen storing location by clicking »Save«.
The changed parameter data is saved now in the data file chosen by you. Thereafter the changed data is
transferred to the device and adopted. .
Once you have entered the parameter setting password, Power-Port-E wont
ask you again for the password for 10 minutes at least. This time interval will
start again, each time parameters are transmitted into the device. If for more
than 10 minutes no parameters are transmitted into the device, Power-Port-E
will ask you again for the password, when you are trying to transmit parameters
into the device.
www.eaton.com 327