Dynapac CA 152, Инструкция по эксплуатации

Страница: 58 / 119

Operation
ICA152-4EN3.pdf 2012-06-12
39
36
42
Fig. Control panel
36. Speed selector, wheels
39. Forward/Reverse lever
42. Parking brake knob
Deactivate the parking brake knob (42) and check
that the parking brake warning lamp is off.
Remember that the roller can start rolling, if it is on
a slope. Deactivate the parking brake knob (42) and check
that the parking brake warning lamp is off.
Remember that the roller can start rolling, if it is on
a slope.
Set the High/Low speed selector (36) to the desired
mode, see decal on the control panel.
Maximum speed Maximum speed
Std, P D PD Std, P D PD
7 km/h 5 km/h 5 km/h 7 km/h 5 km/h 5 km/h
19 km/h 9 km/h 7 km/h 19 km/h 9 km/h 7 km/h
When starting and driving a machine that is cold,
remember that the hydraulic fluid is also cold and
that braking distances can be longer than normal
until the machine reaches the working temperature. When starting and driving a machine that is cold,
remember that the hydraulic fluid is also cold and
that braking distances can be longer than normal
until the machine reaches the working temperature.
Carefully move the forward/reverse lever (39) forwards
or backwards, depending on which direction of travel
is required. Speed increases as the lever is moved
away from the neutral position.
The speed should always be controlled using the
forward/reverse lever and never by changing the
engine speed. The speed should always be controlled using the
forward/reverse lever and never by changing the
engine speed.
Check the parking brake by activating the parking
brake knob (42) while the roller is slowly moving
forward. Check the parking brake by activating the parking
brake knob (42) while the roller is slowly moving
forward.
48