Dynapac CA 152, Инструкция по эксплуатации

Страница: 97 / 119

Maintenance - 250h
ICA152-4EN3.pdf 2012-06-12
Maintenance - 250h
Park the roller on a level surface.
When checking and making adjustments, the
engine should be switched off and the
emergency/parking brake should be applied, if
not otherwise specified. Park the roller on a level surface.
When checking and making adjustments, the
engine should be switched off and the
emergency/parking brake should be applied, if
not otherwise specified.
Rear axle differential - Check oil level
Fig. Level check - differential housing
1. Level/Filler plug
1
Never work under the roller when the engine is
running. Park on a level surface. Block the wheels
securely. Never work under the roller when the engine is
running. Park on a level surface. Block the wheels
securely.
Wipe clean and remove the level plug (1) and check
that the oil level reaches the lower edge of the plug
hole. Top off with oil to the right level if the level is low.
Use transmission oil according to the lubricant
specification.
Clean and refit the plug.
Rear axle planetary gears - Check oil level
Fig. Level check - planetary gear
1. Level/Filler plug
1
Position the roller with the plug in the planetary gear
(1) in the "9 o'clock" position.
Wipe clean and remove the level plug (1) and check
that the oil level reaches the lower edge of the plug
hole. Top up with oil to the right level if the level is low.
Use transmission oil, see lubricant specification.
Clean and refit the plug.
Check the fluid level in the same way on the rear
axle's other planetary gear.
87