Dynapac CA 152, Инструкция по эксплуатации

Страница: 87 / 119

Maintenance, 10h
ICA152-4EN3.pdf 2012-06-12
Coolant level - Check
Fig. Water tank
1. Max. level
2. Min. level
3. Filler cap
1
2
3
Check that level of the coolant is between the max.
and min. marks.
Take great caution if the radiator cap must be
opened while the engine is hot. Wear protective
gloves and goggles. Take great caution if the radiator cap must be
opened while the engine is hot. Wear protective
gloves and goggles.
Fill with a mixture of 50% water and 50% anti freeze.
See the lubrication specifications in these instructions
and in the engine manual.
Flush the system every other year and change
the coolant. Make sure also that the air flow
through the cooler is unobstructed. Flush the system every other year and change
the coolant. Make sure also that the air flow
through the cooler is unobstructed.
Hydraulic reservoir - Check fluid level
Fig. Hydraulic reservoir
1. Sight glass
2. Filler pipe
1
2
Place the roller on a level surface and check that the
oil level in the sight glass (1) is between the max and
min markings. Top up with the type of hydraulic fluid
specified in the lubricant specification, if the level is too
low.
77