Dynapac CA 152, Инструкция по эксплуатации

Страница: 114 / 119

Maintenance - 2000h
ICA152-4EN3.pdf 2012-06-12
Drum - Oil change
Fig. Roller, right-hand side
1. Drain/Filler plug
2. Number plate
3. Sight glass
1
2
3
Place the roller on a level surface so that the drain
plug (1) is straight down. Position a container that
holds 15 liters under the plug.
Save the oil and dispose of it in an approved
manner. Save the oil and dispose of it in an approved
manner.
Clean and remove the drain plug (1). Allow all of the
oil to drain off. Fill with oil according to "Drum -
Checking the oil level."
Take great care when draining warm fluids and
oils. Wear protective gloves and goggles. Take great care when draining warm fluids and
oils. Wear protective gloves and goggles.
Forward/Reverse lever
- Lubrication
Fig. Forward/Reverse lever
1. Screw
2. Plate
3. Cam disc
3 2
1
Remove the screws (1) and take off the plate (2).
Grease the contact surface on the cam disc (3).
Refit the plate (2) with the screws (1).
104