Dynapac CA 152, Инструкция по эксплуатации

Страница: 110 / 119

Maintenance - 1000h
ICA152-4EN3.pdf 2012-06-12
Rear axle planetary gear - Oil change
Fig. Planetary gear/drainage position
1. Plug
1
Position the roller with the plug (1) at its lowest
position.
Wipe clean, unscrew the plug (1) and drain the oil into
a suitable receptacle. The volume is approx. 0.8 liters
(0.85 qts).
Save the oil and dispose of it in an approved
manner. Save the oil and dispose of it in an approved
manner.
Fig. Planetary gear/filling position
1. Plug
1
Position the roller with the plug (1) in the planetary
gear in the "9 o'clock" position.
Fill with oil to lower edge of level hole. Use
transmission oil. See the lubrication specification.
Clean and refit the plug.
Check the fluid level in the same way on the rear
axle's other planetary gear.
100