Dynapac CA 152, Инструкция по эксплуатации

Страница: 94 / 119

Maintenance - 50h
ICA152-4EN3.pdf 2012-06-12
Automatic Climate Control (Optional) -
Inspection
Fig. Drying filter
1. Sight glass
1 The system described in this manual is type ACC
(Automatic Climate Control).
Never work under the roller when the engine is
running. Park the roller on a level surface, chock
the wheels and depress the parking brake control. Never work under the roller when the engine is
running. Park the roller on a level surface, chock
the wheels and depress the parking brake control.
With the unit in operation, open the engine hood and
check using the sight glass (1) that bubbles are not
visible on the drying filter.
The filter is located on the left side of the engine
compartment's front edge. If bubbles are visible
through the sight glass, it is a sign that the refrigerant
level is too low. If so, stop the unit. The unit may be
damaged if it is run with insufficient refrigerant.
Fig. Cab
1. Condensor element
1
Where cooling capacity is markedly reduced, clean the
condensor element (1) located on the rear edge of the
cab. Also clean the cooling unit in the cab. See under
the heading 2000 hours, automatic climate control -
overhaul.
84