Duke GES-102 Скачать руководство пользователя страница 59

Страница: 59 / 107

Soft Serve Freezer Model GES-102

184559

SAFETY

CAUTION

All maintenance and adjustments must be done by a

qualified service technician.

Note:

For Water-cooled freezers connected to glycol cooling systems,

freezers must be switched to city water prior to trouble-shooting freezers.

IMPORTANT:

Some refrigerants are hazardous to the earth's atmosphere. To

protect our environment, use a refrigerant recovery/recycling unit

when removing refrigerant from the system.

This safety alert symbol identifies important personal safety messages

in this manual. When you see this symbol, be alert to the possibility of

personal injury.

DO NOT

attempt to continue until the safety precautions

are thoroughly understood.

CAUTION

TO AVOID ELECTRICAL SHOCK OR CONTACT

WITH MOVING PARTS, MAKE SURE ALL

SWITCHES ARE IN THE “OFF” POSITION

AND THAT THE MAIN POWER SUPPLY IS

DISCONNECTED. SOME FREEZERS HAVE MORE

THAN ONE DISCONNECT SWITCH.

14 Troubleshooting

Содержание GES-102











































































































Результаты поиска

Содержание GES-102

Отзывы:

Duke GES-102, Руководство оператора с иллюстрированным перечнем запчастей, Страница: 59 / 107

Результаты поиска

Содержание GES-102

Отзывы: