Duke GES-102, Руководство оператора с иллюстрированным перечнем запчастей, Страница: 35 / 107

Soft Serve Freezer Model GES-102
184559 25
8.2 Disassembly Instructions
(continued)
Figure 8-4 MTS
5. (See figure 8-3.) Remove the cup
seals and o-rings from the plastic
washers on the shaft seal assemblies.
6. Remove the spigot assemblies, air
bleed plugs, and o-rings from the
head and spigot assemblies.
7. Cleaning with Mix Stored on Shelf
Insure air curtain is installed for
Cabinet Refrigeration (figure 8-6).
Cleaning with mix stored in remote
cooler - Move mix to cooler, remove
shelves and move them to cleaning
sink.
8. Remove the MTS hose assemblies
form the Mix Transfer Systems as
follows (figure 8-4):
a. remove cover,
b. loosen the hand knob,
c. swing back the shoe clamp,
d. swing open the roller shoe,
e. loosen the clamp on braided hose,
f. remove duckbill in mix adapter,
keep adapter in bucket.
Figure 8-5 MTS Hose Assembly
g. Slide hose assembly out of roller
support housing, this will allow
water in tube to drain into bucket.
pull tube off cylinder inlet and slide
hose assembly out of roller support
housing.
9. Disassembly MTS hose assemblies
as shown in figure 8-5, and take to
cleaning sink.
A B C D E A B C E
HOSE REMOVAL INSTRUCTIONS
A)
B)
C)
D)
E)
M02080rev3
LOOSEN KNOB
SWING BACK SHOE CLAMP
SWING OPEN ROLLER SHOE
LOOSEN CLAMP
PULL TUBE OFF CYLINDER INLET AND REMOVE