Duke GES-102, Руководство оператора с иллюстрированным перечнем запчастей, Страница: 12 / 107

Soft Serve Freezer Model GES-102
2 184559
— continued
Figure 2-1 Machine bolted to Shipping Base
Figure 2-2 Installing Mounting Legs or Casters
CAUTION
Be sure to properly support the
machine when removing bolts
and installing legs or casters.
When the unit is received and while
the carrier is still present, inspect the
shipping carton for any damage that
may have occurred in transit. If the
SHOCKWATCH
®
label indicates red and/
or the carton is broken, torn, or punctured
note the damage on the carrier’s freight
bill and notify the carrier’s local agent
immediately. Also note on the freight bill
1. Remove the carton from the pallet,
and move the machine as close as
possible to the permanent location.
2. Remove the shipping bolts on the
bottom of the freezer (figure 2-1) and
install either the legs or casters (figure
2-2).
NOTE:
Screw casters or
legs all the way in coupling,
then adjust out to level side
to side with 1/4 inc (6mm)
slope to the front.
2.1 Uncrating and Inspection
REAR
OF UNIT
CASTER
WITHOUT
BRAKE
CASTER
WITH BRAKE