Duke GES-102, Руководство оператора с иллюстрированным перечнем запчастей, Страница: 53 / 107

Soft Serve Freezer Model GES-102
184559 43
H.C. Duke and Son, Inc. recommends the following schedule to help maintain your Model
GES-102 Twin Twist Soft Serve Freezer in like-new operating condition. Take the time to learn
and perform these routine procedures and receive in return many years of valuable service
from your freezer. Protect your investment!
13 Routine Maintenance
AS NEEDED
CAUTION
To avoid electrical shock or
contact with moving parts, make
sure all switches are in the “OFF”
position and that the main power
supply is disconnected. Some
freezers have more than one
disconnect switch.
1. Clean the Mix Transfer System:
Important:
If the transfer hose is assembled
improperly or replacement has been
neglected, it may be necessary to clean
mix from the MTS due to hose failure.
If this happens frequently the MTS
should be removed for complete
cleaning.
— continued
DAILY
1. Disassemble, wash, rinse, sanitize,
and air-dry all parts that come into
contact with the mix or product.
CAUTION
To prevent bacteria growth,
remove all o-rings when
cleaning. Failure to do so
could create a health hazard.
2. Clean the cylinder, cylinder inlet
tubes and drain tube with the
appropriate brushes.
3. When cleaning, inspect all o-rings,
seals and hoses. Replace any o-ring,
seal or hose that is worn, torn, or
loose fitting.
4. Wipe all exterior surfaces of the
freezer to remove any splattered mix.
5. Check overrun and temperature of
the product.