DResearch TeleObserver MR3180 Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 66

background image

DResearch – User Manual TeleObserver MR3180

2011-02-03

49

Field

Description

List

Listing of the detectors and corresponding defined actions.

Configure activation

Selection detector

Available detectors (system start, digital inputs, motion detectors of the cameras)

to which an activation can be allocated.

For the digital inputs additionally the state (On, Off) is selectable.

Activation of additional detectors, which can be combined with shown detectors

and their condition through a logically AND operator.

Operation

An action which is defined for the existence of a constellation set under ‚Configure

activations’:

Start permanent recording of a camera (definable)

Start alarm recording of a camera (definable)

Switch camera to video out (definable through details)

Finish alle alarm recordings

Switch relays (definable through details)

Send SMS

Switch device off

Videoausgabe weiterschalten

Details

For some defined actions here are additional configuration options available (for

the most no further details are available).

With the setting ‚Switch camera to video out’ it’s possible to define different actions

for activation and deactivation of the detector and to switch the signals of all
cameras. If analogue cameras are configured as not connected, even a circuit
through the Bypass is possible. If the camera is physically connected to the video
input, the video signals will be redirected directly (without going through the
processor) to the video output.

By choosing the option ‚Off’ a black image is generated and displayed.

Attention: Never configure the system in the way that a shut down will be performed if the ignition
signal is on (Ignition = ON and Action = Switch off device). This leads to an undefined state where
the system will continiously reboot. As a result the system can not be reset and has to to be
shipped to the manufacturer.

The list of available detectors will be continuously expanded in upcoming versions. The logical

combination of detector conditions and the definition of an action to be done represent a broad scope

for the representation of various configurations. For example you can interrupt and restart the

recording in the ring archives via a „Pause“ button – without switching off the device.

«
...
47
48
49
50
51
...
»

Содержание TeleObserver MR3180



































































Отзывы:

Нет отзывов

Похожие инструкции для TeleObserver MR3180

VANTAGE LH110 ECO SERIES

Бренд: Lorex Страницы: 5

Бренд: Channel Vision Страницы: 35

Бренд: Lorex Страницы: 164

Бренд: Lawmate Страницы: 1

TRANSCENDENT VT-TR8HA Series

Бренд: Vitek Страницы: 8

Бренд: CCTV Imports Страницы: 74

DH-XVR5216AN-I3

Бренд: Dahua Technology Страницы: 393

ELI-PRO3 series

Бренд: E-line Страницы: 80

Бренд: XtendLan Страницы: 22

Бренд: TECHVIEW Страницы: 50

Бренд: Revo Страницы: 25

Бренд: Euro Video Страницы: 76

EVD-16/400A16MN

Бренд: Euro Video Страницы: 94

Бренд: RTimes Страницы: 21

Бренд: Promise Technology Страницы: 300

Бренд: Datavideo Страницы: 46

Бренд: Datavideo Страницы: 42

Бренд: Dykos Systems Страницы: 126

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды