DResearch – User Manual TeleObserver MR3180
2011-02-03
37
3.1.1.3
System :: Passwords
The length of all passwords and access codes has to be a minimum of 6 and a maximum of 16
characters. There are no passwords in the default factory setting. The codes and passwords are reset
when the works settings are reset (see section on updating the device).
Name
Description
MR3180
The access code is for authorising connections to and from this unit. (needed for
access from video analysis software)
Repeat the access code in the Confirmation field.
Remote
configuration
This password protects the device configuration from changes by third parties.
The password is saved in the device after the Send button has been clicked.
This password also leads the access to the Web-Interface of the device.
The new password is required when reloading the device configuration.
Repeat the remote configuration password in the Confirmation field.
Data security/
Digital Signature
The password is used:
to protect the data against unauthorised access if the hard disk is put in a TTU or
other external device.
to check the digital signature in the video analysis software.
Repeat the password in the Confirmation field for data security.
