DResearch – User Manual TeleObserver MR3180
2011-02-03
39
In this dialogue box you determine the cameras which are to be activated for recording and/or for the
display on a monitor. To determine the settings select one of the cameras and change the values to
suit your requirements.
Global settings
Description
Video norm
For selecting the video standard (PAL or NTSC) for data recording.
List of cameras
Lists the analogue cameras and their settings.
Frame rate
Select how many pictures per second are to be recorded (valid for all cameras).
Maximum picture rate varies depending on the number of active cameras.
Configuration of one or more analogue cameras for the video-OUT reduces the
frame rate of the other cameras, as if they were activated for recording!
Specific settings
Description
Camera name
Give the camera a name (max. 50 characters).
To achieve accurate identification the name might include reference to the
camera’s location (Cam1_entrance).
Keep names as short as possible so that the whole name is visible on the monitor.
Camera connected
Signals the system, that on the relevant video input a camera is connected
physically. All detectors regarding this video input will be activated with this.
Only activate this option, if the camera is really connected to the entry, otherwise
the device displays error messages (e.g. video signal of a camera is missing).
Icon for those cameras which are connected physically to the system, but not
activated for recording:
After setting the option the camera has to be activated for recording. This setting
has to be made in the dialogue ‚Activations’, by setting a new activation ‚At
system start
permanent recording of camera X’.
Only then appears the icon for the cameras activated for recording:
