When the temperature falls outside the 30
°
C to 42
°
C
measuring range:
– 3 dashes in the bottom of the display =
temperature below 30
°
C
– 3 dashes in the top of the display =
temperature above 42
°
C
●
see "Fault, Cause, Remedy" section, p. 43.
Activating skin temperature control
Allow at least 5 minutes for the skin temperature
sensor to reach the baby's temperature.
When value displayed remains constant,
1 Press
ç
key,
2 green Control LED is lit,
skin temperature control is in operation.
3 The display alternates between measured value of
skin temperature and the word SEt.
4 Flashing display of set value for skin temperature.
5 The measured value for air temperature continues to
be displayed.
The incubator offers an appropriate value, depending on
the situation.
Situation
Set value
Set value for air temperature not confirmed; 36.3
°
C
Faulty or disconnected sensor
Actual skin temperature below 35
°
C when 35
°
C
switching over
Actual skin temperature between 35
°
C actual
skin
and 37
°
C when switching over
temperature
selected
Actual skin temperature above
37
°
C
37
°
C when switching over
Confirming set value:
6 Press
P
or
p
key briefly, the display remains
continuously lit.
25
Operation
Using skin temperature control
Check
36 °C
±0,1
Reset
Control
>37 °C
°C
°C
°C HAUT/SKIN/PEAU/PIEL
°C LUFT/AIR
3
2
4
5
1
°C
°C
Check
36 °C
±0,1
Control
Reset
Control
>37 °C
°C
°C
°C HAUT/SKIN/PEAU/PIEL
°C LUFT/AIR
6
6