Douwe Egberts Cafitesse 100, Руководство по обслуживанию

Страница: 99 / 210

07.2004
5A - 17
Functions - Water System Service Manual Cafitesse 100
xxx
xx
xxx
xx
ST
OP
xxx
xx
A.2.5 Disassembly of the Hot Water Delivery Tap
Preparation:
• Switch off the dispenser and disconnect it
from the mains supply.
• Disconnect the dispenser from the water
supply.
• Drain the water. (see chap. 5A.2)
• Place a sufficiently large container (pot)
underneath the hot water delivery tap and
actuate the tap (1) until no more water is
delivered. (Fig. 1)
CAUTION: There is the danger of being
scalded by hot water.
• Remove the front part (2). (Fig. 2) (see
chap. 5G.2)
Disassembly:
• Hold the brass bushing at the hot water
delivery tap inside the housing by means of
a pair of universal nippers. Locktite can
prevent the bushing being moved easily.
• Close the hot water delivery tap (3)
counterclockwise. (Fig. 2)
Make sure that the seals of the hot
water delivery tap inside and outside
the housing do not get lost.
Assembly:
• Mount the new hot water delivery tap in the
reverse order.
CAUTION: When a new hot water delivery
tap is mounted, Loctite must
be applied between the thread
and the brass bushing as
protection against torsion.
Ensure that the seals are mounted
inside and outside.
Assembly of the kit 'dummy caps'
If required by the customer, it is possible to
remove the hot water delivery tap.
• Dismount the hot water delivery tap.
• Remove the brass bushing from the hose.
• Close the hose (4) using the plug (5)
included in the kit. (Fig. 3)
• Secure the hose (4) by means of a hose
clamp (6) as shown in fig. 3.
• Remount the dispenser.
• Close the opening in the housing by using
the dummy cap (7) included in the kit.
(Fig. 3)
STOP
xxxxx
POWER
OFF
ON
ON
OFF
Fig. 1
1
Fig. 2
2
3
Fig. 3
5
4
6
7