Douwe Egberts Cafitesse 100, Руководство по обслуживанию

Страница: 183 / 210

07.2004
5G - 7
Functions - Housing Service Manual Cafitesse 100
xxx
xx
xxx
xx
Fig. 1
2 1
4 6 5 3
A
G.7.2 Key Switch
Preparation:
• Switch off the dispenser and disconnect it
from the mains supply.
• Disconnect the dispenser from the water
supply.
Installation:
• Remove the operating panel cover (1) with
the screw (2). (Fig. 1)
• Withdraw the front cover and the
advertising panel towards the side.
CAUTION: When the front cover is mad e
of glass, there is the danger of
being inured due to incorrect
handling or breaking of the
glass.
• Hold the operating panel at the cross-
shaped part (A) pull it towards the front
and remove it towards the top. (Fig. 1)
• Remove the pc board (3) with 4 screws.
(Fig. 1)
• Remove the stop button from the operating
panel with no imprints and mount it to the
operating panel with imprints.
• Engage the lock (4) into the pc board base
and press the locking ring (5) downwards
until the stop. (Fig. 1)
• Move the safety device for the lock (6) (2
parts) over the lock. (Fig. 1)
• Mount the pc board to the new operating
panel with imprints.
• Mount the new operating panel to the
dispenser.
• Install the advertising panel and the front
cover.
• Install the operating panel cover.
The clamping device included in the kit
is not required for mounting in this
case.