Douwe Egberts Cafitesse 100, Руководство по обслуживанию

Страница: 161 / 210

07.2004
5D - 9
Functions - Product Delivery Service Manual Cafitesse 100
Installation of the kit 'drainage for the drip
tray':
Preparation:
• Switch off the dispenser and disconnect it
from the mains supply.
• Disconnect the dispenser from the water
supply.
Installation:
• Insert the nozzle (1) into the hose (2)
(252 mm) until the part with the greater
diameter is completely enclosed.
Insert the hose (2) with the nozzle (1) into
the T-union (3). (Fig. 1)
• Connect the overflow elbow (4) on the rear
of the dispenser. (Fig. 1)
• If necessary open the float cover on the pot
carrier outlet (9). (Fig. 2)
• Position the hose (2) underneath the
dispenser.
Connect the hose to the pot carrier outlet
and fasten it by means of cable binder (5).
(Fig. 2)
• Move the coil spring (6) over the outlet
hose (7). (Fig. 1)
• Connect the outlet hose (7) to the T-union
(3). (Fig. 1)
CAUTION: The coil spring (6) must be
positioned in such a way that
bending of the hose is
prevented. (Fig. 1)
The outlet hose must be
placed on a lower level than
the T-union and below the
level of the outlet spout of the
drip tray.
• Open the predetermined breaking point for
the outlet (8) in the drip tray from the
bottom. (Fig. 3)
D.7.1 Drainage for the Drip Tray
Fig. 1
Fig. 2
STOP
xxx
xx
5
2
4
2
3
1
7
6
Fig. 3
8
9