851-899 Rev. A
47
Dorner Mfg. Corp.
FlexMove FC (105 mm) Conveyor System
Preventive Maintenance and Adjustment
5. Remove idler pulley assembly
from belt
.
Figure 150
Figure 150
6. Remove socket head screw
from
end of idler pulley assembly.
Figure 151
Figure 151
7. Remove bolt
, washer
, wave washer
.
Figure 152
Figure 152
8. Repeat on opposite side.
9. Remove two weights
from each
side of pulley
.
Figure 153
Figure 153
10. Install components reverse of removal, using two hex
wrenches
on each side of idler
assembly to tighten components.
Figure 154
Figure 154
2
1
1
5
1
2
3
4
6
NOTE
Be certain that notches (Figure 154, item 2)
on both plates are on top side, and spacers
are in same orientation, as shown, before
tightening components.
1
2
1
1
1
2