851-899 Rev. A
39
Dorner Mfg. Corp.
FlexMove FC (105 mm) Conveyor System
Preventive Maintenance and Adjustment
Required Tools
• 3/32
"
hex wrench
• 3 mm hex wrench
• 4 mm hex wrench
• 5 mm hex wrench
• 6 mm hex wrench
• 8 mm hex wrench
• 10 mm wrench
• 13 mm wrench
• 16 mm wrench
• Chain Removal Tool
• Slide Rail Cutter
• Drill Fixtures for Slide Rails
• Riveting Tool
Conveyor Chain Replacement
Replacing a Section or Entire Chain
1. Use chain removal tool or a punch and hammer to push
the chain rod
out.
Figure 118
Figure 118
2. Replace old section of chain.
A
WARNING
SEVERE HAZARD!
LOCK OUT POWER before removing guards
or performing maintenance. Exposed moving
parts can cause serious injury.
1
A
WARNING
SEVERE HAZARD!
If conveyor chain is damaged or worn,
replace chain section.
A
CAUTION
DO NOT reuse chain rods that are damaged,
bent, or show signs of wear.
NOTE
Drive spindle shaft assembly replacement is
recommended with belt replacement (see
“Drive Spindle Shaft Replacement” on
page 41).