Dorner Mfg. Corp.
22
851-899 Rev. A
FlexMove FC (105 mm) Conveyor System
Installation
Weighted Take-Up
1. Install idler pulley assembly
onto
.
Figure 61
Figure 61
2. Make sure teeth on pulley and guard are facing mating
teeth on take up box assembly.
3. Raise weighted take up box assembly, with plate
on idler pulley assembly on outside
of outer plate
of weighted take up
assembly.
Figure 62
Figure 62
4. Raise weighted take up assembly
with notch
in assembly mating with
on conveyor frame.
Figure 63
Figure 63
5. Install and tighten two screws
on
each side to secure assembly to frame.
Figure 64
Figure 64
Figure 65
Figure 65
NOTE
Remove as much chain slack as possible that
will still allow idler to be installed.
2
1
1
2
NOTE
• For standard belt use these holes (Figure
• For friction insert belt use these holes
2
3
1
1
1
1
1
2
2