851-899 Rev. A
53
Dorner Mfg. Corp.
FlexMove FC (105 mm) Conveyor System
Preventive Maintenance and Adjustment
9. Slide idler assembly within slot
only enough to remove excess slack from belt
. Tighten socket head screws
.
Figure 176
Figure 176
10. Rotate drive shaft
to verify
. Belt should turn
freely. Loosen idler socket head screw
and adjust, if necessary.
Figure 177
Figure 177
11. Install timing belt:
• On idler end, route and install belt
as shown. Press up on tensioner
and
tighten two socket head screws
.
Figure 178
Figure 178
• On drive end, route and install belt
as
shown. Press down on tensioner
and
tighten two socket head screws
Figure 179
Figure 179
12. Install cover
with two socket head
screws
.
Figure 180
Figure 180
A
CAUTION
DO NOT overtighten belt or excessive wear
will occur.
3
2
1
3
2
1
2
1
3
3
1
2
1
2