Dorner Mfg. Corp.
48
851-899 Rev. A
FlexMove FC (105 mm) Conveyor System
Preventive Maintenance and Adjustment
11. Install idler pulley assembly
onto
conveyor in belt loop
.
Figure 155
Figure 155
12. Install remaining components reverse of removal. (For
installation instructions, refer to “Weighted Take-Up”
on page 22 in the Installation section.)
Power Transfer
Removal
1. Remove two socket head screws
and cover
from power transfer
assembly.
Figure 156
Figure 156
2. Loosen two socket head screws
holding tensioning pulley
onto
timing belt
.
Figure 157
Figure 157
3. Remove timing belt
from
assembly.
4. Loosen idler socket head screw
on
both sides of the conveyor.
Figure 158
Figure 158
5. Slide idler assembly within slot
to
remove tension on belt.
6. Remove two socket head screws
and pinch guard
.
Figure 159
Figure 159
2
1
2
1
2
1
3
1
2
2
1
1