![background image](http://html2.mh-extra.com/html/paradox/nv75m/nv75m_user-and-installation-manual_3594739001.webp)
NV75M-EI00 03 2016
paradox.com
NV75M/MX
Installation Manual V1.0
16 Meter Indoor Dual
Mironel Optics with Anti-Mask
and Pet Immunity Dual Detector
General Description
The NV75M/MX is an indoor industry-leading detector providing
superior 16 meter detection with rock solid stability thanks to the
revolutionary dual Mironel Mirror/Fresnel PIR optics. Combined with
Paradox true Pet Immunity and best-in-the industry active Anti-Mask
technology (EN Grade 3). The NV75M/MX provides an unmatched
high security solution for any indoor installation.
Installing the NV75M/MX (Fig. 1)
Wall Mount
Bracket Mount
Creep Zone/Pet Selection
Note: Remove detector assembly as described in Fig. 1. When
selector is UP, Pet Mode; when DOWN, Creep Zone is active and
there is no Pet Immunity.
Dip Switch Settings
Sensitivity Settings
LED Display
Programming the NV75MX via Keypad or Baby-
Ware
Via Keypad
1. Enter EVO Installer Programming Mode, programming section
4003
.
2. Enter the detector’s 8-digit
Serial Number
. Enter the 3-digit
Section as per Table 2.
Cover Tamper
Step 1
Step 3
NV75MX
TMP
COM
ALM
COM
AM
+
YEL
GRN
1 2 3
BLK
RED
NV75M
Step 2
(Table 1)
Wall Mount x6
Bracket Adjustment
Screw Opening
Corner Mount x4
Tamper Screw
Wall/Corner
Wiring Entry x2
1
2
3
4
5
Table 1
DIP SWITCH
OFF
ON (DEFAULT)
1. LED
OFF
ON
2. EDGE
DUAL
SINGLE
3. FUTURE
FUTURE
FUTURE
Feature
LED Status Indicator
Tamper open
Green: ON for 0.3 seconds every 30
seconds
PIR sensitivity level setting
Green: Flashes 1-5 times according
to the selected level
Alarm detection
Red: ON for 3 seconds
Booting/Tamper close
Green/Red alternating flashes
for 45 seconds
Anti-mask detection
Flashes orange rapidly (pre-alarm
state) and then constant orange when
in alarm.
UP - Pet
DOWN - Creep
7m
9m
16m
13m
11m*