64
ED50
01-2020
DL4615-001
dormakaba ED50 Installation Instructions – Fine cover
Chapter 18
Fig. 18.1.5 Arm with CPD lever and track
18.1.7 Configuration parameters, detail.
Fig. 18.1.4 Arm with track
Fig. 18.1.6 Push arm
Fig. 18.1.7 Deep reveal push arm
Parameter and value
range, factory setting
=
bold
.
Parameter description
1
0 - 2
0
Installation type
0
Pull
• Arm with track (Fig. 18.1.4).
• Arm and CPD lever with track
(Fig. 18.1.5).
Wall mounting on swing (hinge)
side.
1
Push
• Standard push arm
(Fig. 18.1.6)
Wall mounting on approach
(non-hinge) side.
2
Push
• Arm with track (Fig. 18.1.4).
• Arm and CPD lever with track
(Fig. 18.1.5).
Wall mounting on approach
(non-hinge) side.
2
ED50
-3 to 29
0
Reveal depth
0
Reveal is set in increments of
10 mm (3/8"), "3" = 30 mm (1 1/8")
• ED50: [-30 to 290 mm]
-1 3/16" to 11 13/32"
If using arm with CPD lever
(Fig. 18.1.5), approximately
1 3/16" [30 mm] must be
deducted from actual reveal
(Para. 17.4).
3
Tb
ED50
7 to 12
12
Door width
10
Door width is set in increments of
100 mm (4"),;"9" = 900 mm (35.4").
• ED50: [700 - 1219] 28" - 48"
18.1.9 Arm with track – push installation
[Application specific].
1. For doors without fire or smoke detection
requirements.
2. Maximum reveal depth of 2 3/8" [60].
3. Maximum opening width at a reveal depth of
2 3/8"[60] is reduced to 95 degrees.
18.1.8 CPD arm and lever; rd parameter adjustment.
• Value of parameter
rd
must be reduced by 3/16" [30]
when using the arm with CPD lever in a pull
installation.
• Example: ED50 with arm and CPD lever in pull
installation with reveal of 30 mm (1 1/8").
Parameter rd setting = 0 (Reveal of 30 mm - 30 mm).
4
0 to 4
0
Door type
0
Single door
1
Double door
• Overlapping door (with
astragal)
• Active door operator.
2
Double door
• Overlapping door (with
astragal)
• Passive door operator.
3
Double door
• Edgeless door (no astragal)
• Active door operator.
4
Double door
• Edgeless door (no astragal)
• Passive door operator.
