User Information
Load-bearing tower Staxo 40
System description
15
999805002 - 09/2018
Linking the frames
Staxo 40 coupler
The vertically stacked frames are attached to one
another by the
Staxo 40 coupler
with its integrated
stop-ring.
Because this coupler extends such a long way (15
cm)
into each frame, no extra pin-type safety locks are
needed when towerframes are erected and dismantled
in the upright.
A crane-handling-safe link, using a Staxo 40 tube con-
nector d48.3mm, is required in the following cases
▪
when the towerframes are assembled in the horizon-
tal
▪
when the towerframes are lifted by crane
▪
if there are forces acting upon the tower which cause
tensile stress
Securing the screw-jack heads and feet
against pull-out
Staxo 40 anti-dropout lock (E)
A crane-handling-safe link, using a Staxo 40 anti-drop-
out lock, is required in the following cases:
▪
when the towerframes are assembled in the horizon-
tal
▪
when the towerframes are lifted by crane
▪
if there are forces acting upon the tower which cause
tensile stress
Erecting quadratic towers
Permitted tensile force 11.7
kN
98024-213-01
98024-213-02
Permitted tensile force 5 kN
NOTICE
On quadratic (150x150 cm towers), do not mix
the frame plane and bracing-strut plane within
the same tower!
98024-282-03
E
98024-214-01
E
98024-305-01
98024-304-01
