Dodge 2015 Dart Скачать руководство пользователя страница 426

Страница: 426 / 664

Brake/Transmission Shift Interlock System

This vehicle is equipped with a Brake Transmission Shift

Interlock System (BTSI) that holds the shift lever in PARK

unless the brakes are applied. To shift the transmission

out of PARK, the ignition switch must be turned to the

ON/RUN position (engine running or not) and the brake

pedal must be pressed.

Six-Speed Automatic Transmission (1.4L Turbo
Engine Only — DDCT)

The transmission gear position display (located in the

instrument panel cluster) indicates the transmission gear

range. You must press the brake pedal and the lock

button on the shift lever to move the shift lever out of

PARK (refer to “Brake/Transmission Shift Interlock Sys-

tem” in this section). To drive, press the lock button on

the front of the shift lever and move the shift lever from

PARK or NEUTRAL to the DRIVE position.

The electronically-controlled transmission provides a

precise shift schedule. The transmission electronics are

self-calibrating; therefore, the first few shifts on a new

vehicle may be somewhat abrupt. This is a normal

condition, and precision shifts will develop within a few

hundred miles (kilometers).
Only shift from DRIVE to PARK or REVERSE when the

accelerator pedal is released and the vehicle is stopped.

Be sure to keep your foot on the brake pedal when

shifting between these gears.
This transmission is programmed to prevent shifting

from REVERSE to DRIVE or DRIVE to REVERSE, if

vehicle speed is above 6 mph (10 km/h). This safety

feature helps protect your transmission from damage.
The transmission shift lever has PARK, REVERSE, NEU-

TRAL, DRIVE, and AutoStick® (+/-) shift positions.

Manual shifts can be made using the AutoStick® shift

control (refer to “AutoStick®” in this section for further

424 STARTING AND OPERATING

Содержание 2015 Dart

























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды

Dodge 2015 Dart, Руководство пользователя

Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды