Dodge 2015 Dart Скачать руководство пользователя страница 405

Страница: 405 / 664

NOTE:

•

It is not necessary to move the temperature settings. The

system automatically adjusts the temperature, mode, and

blower speed to provide comfort as quickly as possible.

•

The temperature can be displayed in U.S. or Metric

units by selecting the US/M customer-programmable

feature. Refer to the “Uconnect® System Settings” in

this section of the manual.

To provide you with maximum comfort in the Automatic

mode, during cold start-ups the blower fan will remain

on low until the engine warms up. The blower will

increase in speed and transition into Auto mode.

Manual Operation Override

The system allows for manual selection of blower speed,

air distribution mode, A/C status and recirculation con-

trol.
The blower fan speed can be set to any fixed speed by

adjusting the blower control. The fan will now operate at

a fixed speed until additional speeds are selected. This

allows the front occupants to control the volume of air

circulated in the vehicle and cancel the Auto mode.
The operator can also select the direction of the airflow

by selecting one of the available mode settings. A/C

operation and Recirculation control can also be manually

selected in Manual operation.

NOTE:

Each of these features operates independently from

each other. If any feature is controlled manually, tempera-

ture control will continue to operate automatically.

UNDERSTANDING YOUR INSTRUMENT PANEL 403

Содержание 2015 Dart

























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды

Dodge 2015 Dart, Руководство пользователя

Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды