Dodge 2015 Dart Скачать руководство пользователя страница 599

Страница: 599 / 664

CAUTION!

•

Do not use abrasive or strong cleaning materials
such as steel wool or scouring powder that will
scratch metal and painted surfaces.

•

Use of power washers exceeding 1,200 psi (8 274 kPa)
can result in damage or removal of paint and decals.

Special Care

•

If you drive on salted or dusty roads or if you drive

near the ocean, hose off the undercarriage at least once

a month.

•

It is important that the drain holes in the lower edges

of the doors, rocker panels, and trunk be kept clear and

open.

•

If you detect any stone chips or scratches in the paint,

touch them up immediately. The cost of such repairs is

considered the responsibility of the owner.

•

If your vehicle is damaged due to a collision or similar

cause that destroys the paint and protective coating,

have your vehicle repaired as soon as possible. The

cost of such repairs is considered the responsibility of

the owner.

•

If you carry special cargo such as chemicals, fertilizers,

de-icer salt, etc., be sure that such materials are well

packaged and sealed.

•

If a lot of driving is done on gravel roads, consider

mud or stone shields behind each wheel.

•

Use MOPAR® Touch Up Paint on scratches as soon as

possible. Your authorized dealer has touch up paint to

match the color of your vehicle.

Wheel And Wheel Trim Care

•

All wheels and wheel trim, especially aluminum and

chrome plated wheels, should be cleaned regularly

with a mild soap and water to prevent corrosion.

MAINTAINING YOUR VEHICLE 597

Содержание 2015 Dart

























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды

Dodge 2015 Dart, Руководство пользователя

Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды