Dodge 2015 Dart Скачать руководство пользователя страница 438

Страница: 438 / 664

Only shift from DRIVE to PARK or REVERSE when the

accelerator pedal is released and the vehicle is stopped.

Be sure to keep your foot on the brake pedal when

shifting between these gears.
The transmission shift lever has PARK, REVERSE, NEU-

TRAL, DRIVE, and AutoStick® (+/-) shift positions. Manual

shifts can be made using the AutoStick® shift control (refer

to “AutoStick®” in this section for further information).

Toggling the shift lever rearward (+) or forward (-) while in

the AutoStick® position (beside the DRIVE position) will

manually select the transmission gear, and will display the

current gear in the instrument cluster as 1, 2, 3, etc.

NOTE:

If the shift lever cannot be moved to the PARK,

REVERSE, or NEUTRAL position (when pushed forward)

it is probably in the AutoStick® (+/-) position (beside the

DRIVE position). In AutoStick® mode, the transmission

gear (1, 2, 3, etc.) is displayed in the instrument cluster.

Move the shift lever to the right (into the DRIVE [D]

position) for access to PARK, REVERSE, and NEUTRAL.

Gear Ranges

DO NOT race the engine when shifting from PARK or

NEUTRAL into another gear range.

NOTE:

After selecting any gear range, wait a moment to

allow the selected gear to engage before accelerating.

This is especially important when the engine is cold.

PARK (P)

This range supplements the parking brake by locking the

transmission. The engine can be started in this range.

Never attempt to use PARK while the vehicle is in

motion. Apply the parking brake when leaving the

vehicle in this range.
When parking on a level surface, you may shift the

transmission into PARK first, and then apply the parking

brake.
When parking on a hill, apply the parking brake before

shifting the transmission to PARK, otherwise the load on

436 STARTING AND OPERATING

Содержание 2015 Dart

























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды

Dodge 2015 Dart, Руководство пользователя

Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды