Dodge 2015 Dart Скачать руководство пользователя страница 107

Страница: 107 / 664

What is the weight limit (child’s

weight of the child re-

straint) for using the Tether Anchor

with the seat belt to attach a forward

facing child restraint?

Weight limit of the Child Restraint

Always use the tether anchor when

using the seat belt to install a for-

ward facing child restraint, up to

the recommended weight limit of

the child restraint.

Can the rear-facing child restraint

touch the back of the front passen-

ger seat?

Yes

Contact between the front passen-

ger seat and the child restraint is

allowed, if the child restraint

manufacturer also allows contact.

Can the head restraints be re-

moved?

Yes

All head restraints may be re-

moved.

Can the buckle stalk be twisted to

tighten the seat belt against the belt

path of the child restraint?

Do not twist the buckle stalk in a

seating position with an ALR re-

tractor.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 105

Содержание 2015 Dart

























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды

Dodge 2015 Dart, Руководство пользователя

Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды