Dodge 2015 Dart Скачать руководство пользователя страница 380

Страница: 380 / 664

Pressing the PLAYER button will change the mode to

auxiliary device if the AUX jack is connected.

NOTE:

•

The head unit will have no control of the AUX device.

You can only control the volume on the head unit. No

information about the song will be displayed.

•

The AUX device must be turned on and the device’s

volume set to the proper level. If the AUX audio is not

loud enough, turn the device’s volume up. If the AUX

audio sounds distorted, turn the device’s volume

down and radio volume up.

Operation Instructions — Universal Serial Bus
(USB) — If Equipped

The USB audio input allows the user to plug in a flash

drive and utilize the vehicle’s audio system to amplify

the source and play through the vehicle speakers.

Pressing the PLAYER button will change the mode to

USB when an iPod® or external USB drive is connected.
Pressing the ENTER/BROWSE button while in USB

mode will bring up a list of available categories within

the USB. The categories will consist of: Playlists, Artist,

Album, Genre, Audiobooks, Podcasts and all Songs..

Browsing through the categories will function the same

as iPod® browse. USB will not have folder browsing.
If the USB connected does not have any audio files and

the user selects USB as the device to play audio the screen

will display, “No audio files found.” This messaged is to

be displayed for all devices that do not have audio files

when connected and selected.

Security

If this radio is installed in a vehicle that does not have a

matching Vehicle Identification Number (VIN) an Secu-

rity code will need to be entered by the dealer.

378 UNDERSTANDING YOUR INSTRUMENT PANEL

Содержание 2015 Dart

























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды

Dodge 2015 Dart, Руководство пользователя

Результаты поиска

Содержание 2015 Dart

Отзывы:

Похожие инструкции для 2015 Dart

Бренды по названию

Популярные бренды